User Manual

Please place the headphones onto the charging dock or plug it into a USB wall charger (DC 5V/0.5-2A) using

the included micro USB cable. Normally it will take about 2 hours to fully charge. Place the headphones onto

the charging dock, the LED indicator on the stand will stay solid WHITE while charging and turn GREEN when

complete.

To assemble the hanger onto the base – please match the arrow on the hanger support with the UNLOCK

position on the base. Insert and twist clockwise until it clicks into position.

Note: To avoid damage to headphones, please DO NOT charge the headphones using both the desktop

charging stand and the micro USB cable at the same time.

Clear pairing history

If you have issues with the audio stream skipping or cutting out when using Avantree Aria Me (AS90TA), please

try to clear pairing history as following:

Firstly, turn on the headset (Non-calling Status), then Hold BOTH [

] and [ ] for 5s till LED blinks PINK for 2s,

then the headphones enter into PAIRING MODE automatically.

Troubleshooting

https://avantree.com/catalogsearch/result?q=Aria+Podio

1. No sound with PC?

1) Under Playback Devices select the Avantree AS90TA as the default playback device

2) When using AS90TA to make VOIP calls from an app, please select the AS90TA, Hands-Free for Microphone

and Speaker device

2. No sound using a Bluetooth transmitter to watch TV?

1) Ensure the Bluetooth transmitter and headphones are connected properly

2) Check that your audio OUTPUT is functioning properly

• AUX & RCA (red and white) outputs on TV – test audio with any wired headphone

3) Change your TV audio out device setting to External speakers/Headset

3. Headphones do not pair with Bluetooth device

2) For Bluetooth transmitter, ensure the transmitter is in Pairing mode – please refer to user manual.

3) For mobile phones, tablets and PCs:

• Delete/forget the “Avantree AS90TA” from your device’s Bluetooth list and then try to pair again

• Clear the headphone’s pairing history, and pair again