User Manual

Works as Bluetooth Transmitter (TX Mode)

Pair and connect to Bluetooth headphone/receiver

1. Turn on the TC417: Press and hold MFB button for 3 seconds until you see GREEN light.

2. Set the TC417 to TX mode: Slide TX/RX switch to “TX” position.

3. Enter the TC417 into PAIRING MODE: On rst use, the TC417 will enter pairing mode automatically.

The LED indicator will ash

GREEN rapidly. Alternatively, press and hold the PAIR button for 2

seconds to enter pairing mode.

4. Enter headphones into PAIRING MODE: Please refer to your headphone’s user manual (Usually the

LED on headphones ash Blue and Red alternately or ash Blue rapidly when in pairing mode).

5. Connecting: During the pairing process, keep the devices close to each other and wait. Once

connected, LED indicator stays SOLID

GREEN.

Reconnect

NO need to re-pair the transmitter and headphones for each use. The transmitter will ALWAYS auto

reconnect to the last paired device within 5-10 seconds after powering on both devices. Alternatively,

restart both the transmitter and headphones and wait 5 -10 seconds for them to reconnect.

RX TX

PAIR