User's Manual

4. Basic Operations

4.1 Using 3.5mm audio cable

1). Connect the 3.5mm audio cable from

the speaker to your music player.

2). Switch the Wire/OFF to Wire position and the LED keeps blue when Line in is

working.

3). Adjust the volume using the controls on your music player.

4). After use, switch off the speaker and disconnect the audio cable.

4.2 Using Bluetooth

1). Switch the ON/OFF/Bluetooth to the Bluetooth position - LED will flash blue

and red alternately which means it is searching devices around.

2). Turn on the Bluetooth of your mobile phone or music device, search for

Bluetooth device.

3). Select “Avantree Pluto Air” in the list of Bluetooth devices, then follow the

steps and enter pin code 0000 to pair.

4). Once paired and connected, LED will stay blue. The Bluetooth speaker will be

automatically connected to your mobile phone or music device whenever you

turn the Bluetooth speaker on again and the device is in the range.

NOTE:

1). When losing connection, the speaker will automatically switch itself off after

30minutes, please restart it again when connect.

2). When the battery is nearly running out, LED will not show up if you switch to

Bluetooth side. But it may work fine on the Line in side. Please charge it.

3). Please go through the pairing procedure and make sure the speaker doesn’t

connect with other Bluetooth device when you change to a new device.

4). Do not play music at excessive levels as damage to the equipment may result.

5). Do not use outdoors in the wet or in damp surroundings.

5. Product Specification

Dimension: 45mm x 45mm × 55mm

Net weight: 65g

Bluetooth compliance: Bluetooth V3.0

Operating frequency band: 2.402-2.480 GHz (2.4GHz ISM segment)