User's Manual

5. Transmitter, Pairing with a Bluetooth device (Tutorial online)
After BTTC-200X, under TX mode, has connected to a bluetooth stereo device,
you can enjoy music wirelessly. Before pairing, please make sure your Bluetooth
stereo device supports Bluetooth A2DP profile. ( such as Bluetooth stereo
headset Avantree Jogger, Bluetooth speaker Avantree Pacifica.)
Pairing procedure:
A．Plug the 3.5 mm audio cable into BTTC-200X’S 3.5 mm audio socket; and
put plug the other end into the audio output of an audio source system.
B. Ensure BTTC-200X has pushed into TX mode, and the device is off.
C. Put BTTC-200X and your Bluetooth stereo receiver device within 1 meter.
D. Power on your Bluetooth stereo receiver device and put it into pairing
mode.
E． Press and hold BTTC-200X’S MFB button for about 5 -7 seconds until the
LED light flashes blue quickly, indicating it is in pairing mode.
(Notice: For the first time use or first time power on after clear connection list,
BTTC-200X will automatically enter into pairing mode, the Blue LED light
flashes quickly.)
F. Then BTTC-200X will automatically search, pair and connect your Bluetooth
stereo device.
G. After successful connection, the LED light will flash blue twice every 4
seconds.
H． Pairing is completed. Now you can enjoy wireless music.
Note:
1. The pairing mode will last 2 minutes. The transmitter will enter standby mode
if no devices can be connected with 2 minutes
2. The BTTC-200X can pair with stereo Bluetooth devices with PIN code “0000”,
“1111”, “8888” or “1234”.
3. Once power on, the BTTC-200 will be automatically connected with the last
connected device.
4. The transmitter BTTC-200 will automatically switch off if no devices can be
connected within 5 minuters.
5. Clear the pairing list: From off, press and hold the MFB button for about 12
seconds until red LED is on for 1 second and then blue LED is on for 1
second.
6. LED indicator instruction:
LED indicator TC200 of TC200 under TX mode
Blue LED blinks continuously Pairing mode, lasts for 2 minutes
Blue LED flashes every 1 second Standby mode, not connected with
device
Blue Led flashes twice every 4
seconds
Connected with a device
Red LED blinks Low Power
We found most of the online technical support questions are caused by improper
pairing. Please follow the instruction step-by-step.
6. Receiver, Turn On / Off
Pls. push the click button to RX mode from TX / RX positon, before power on.
TX or RX mode can not be changed after powering on Saturn.
Turn On: press and hold TC200X’s MFB button for around 5 - 7 seconds until the
blue LED is on for 1 second.
Turn Off: press and hold the MFB button of Saturn for around 3 - 4 seconds until
the red LED is on for 1 second, and then go off.
7. Receiver, working with a Bluetooth device (Tutorial online)
7.1 Pairing procedure:
A. Plug the 3.5 mm audio cable into BTTC-200X’S 3.5 mm audio socket. Plug the
other end into the audio input of your home hi-fi stereo system.
B．Ensure BTTC-200X has pushed to RX mode and the device is off.
C．Put BTTC-200X and your Bluetooth enabled phone within 1meter.
D．Press and hold BTTC-200X’s MFB button for about 6-8 seconds until the
LED light flashes blue and red alternatively, which is in pairing mode.
E． Make your phone into Bluetooth mode and Search the available device
F． Once found “Avantree BTTC-200X’’, follow the steps and enter pin code
0000 to pair when requested.
(Note: Different phone / tablets have different procedure to activate the
Bluetooth function, and please make sure the device is visible to nearby
device, for the device Bluetooth version above 2.1 no need to input pin
code when pairing)
G. Connect the BTTC-200X to your phone.