User's Guide

6-2 Installation and commissioning procedures
Internet BWA System 3200 NTXXXXXX Rel 3.0 Draft October 2000
Procedure 6-1
Unpacking, identifying and matching the system
Use this procedure to unpack and handle the Internet BWA System 3200. Use
this procedure to also identify and match the Internet BWA System 3200
system (radio-link).
Requirements
Before you start:
• Select an appropriate area to unpack the shipping container. This area must
be level, dry and dust-free.
• Identify the frequencies that the radio is to operate in. The bandwidth of
the radio (bandpass filters) cannot be changed in the field. The radio must
return to the factory if you require a change in bandpass filters.
Action
Step Action
Unpack and inspect the Internet BWA System 3200 components
1 Remove all parts and accessories from the container and packing material.
2 Keep the packaging materials for pssible returns.
3 Check the equipment contents with the packing list and report any
discrepancies immediately.
4 Inspect the equipment for damage.
5 Locate the two 433.92 MHz whip antennas.
6 Place the 433.92 MHz antennas in a safe area or mount them directly to the
RF unit and Hand-held unit to ensure that they are not misplaced.
—continued—
CAUTION
Possible damage to the Internet BWA System 3200
Use caution when you unpack the Internet BWA
System 3200 terminal from its packaging. The radio
terminal and integrated antenna are sensitive to minor
changes.