User's Guide

6-6 Installation and commissioning procedures
Internet BWA System 3200 NTXXXXXX Rel 3.0 Draft October 2000
Procedure 6-2 (continued)
Installing the Internet BWA System 3200 on a pole
Equipment
Required equipment (refer to Figure 6-1 and Figure 6-2):
• One azimuth adjustment plate (part 101488-1) that attaches with:
— One U-bolt, 4.5 pipe, 3/8-16
— Two 3/8-16 hex nuts, bronze
— Two 3/8 flat washers
— Two 3/8 split lock washers
• One azimuth adjustment rod with hardware
• Two pole mount clamps that attach with:
— Four 3/8-16 x 6.0" bolts, galvanized
— Four 3/8-16 hex nuts, galvanized
— Four 3/8 flat washers, galvanized
— Four 3/8 split lock washers, galvanized
• One antenna mounting plate and hardware
• One elevation adjustment rod with a brass cylinder
• One antenna with a mounting flange
• One outdoor unit (ODU)
Figure 6-1
Mounting equipment for the Internet BWA System 3200
MOP0093p.eps
—continued—
Azimuth adjustment
plate
Azimuth
adjustment
rod
Elevation
adjustment rod
Brass
cylinder
Direction of
Antenna
Antenna mounting
plate
Pole clamp
(2 places)