Product Bulletin Bulletin Number: Date: P-2008-0032-Global 1 February 2008 UNIStim Firmware 0621C4P for IP Phone 2007, and 0623C4I, 0624C4I, 0625C4I and 0627C4I for IP Phone 1110, 1120E, 1140E and 1150E respectively REVISION HISTORY Date Revision # Summary of Changes 31-January-08 Original bulletin This is the original publication 1-February-08 Revision 1 Add advisory concerning Auto-VLAN feature Introduction Nortel* is pleased to announce the availability of UNIStim firmware version 0621C4P for
Enhancements Application Gateway New Set Registration Model using Cookies (Applies to IP Phone 2007, 1110, 1120E, 1140E and 1150E) Application Gateway releases prior to 6.2 obtained phone DN to IP mapping information from the Communication Server 1000 via a connection to the administrative console port. With firmware releases 0621C4P, 0624C4I, 0625C4I and 0627C4I the Application Gateway Release 6.
Quality Improvements The 0621C4P, 0623C4I, 0624C4I, 0625C4I and 0627C4I firmware loads also continue to improve the overall quality of the IP Phone 2007 and Next Generation IP Phones (1110, 1120E, 1140E and 1150E) through the delivery of ongoing resolution of CRs and closed cases. In total, well over 100 quality improvements have been delivered, and 15 customer cases have been closed in these new firmware loads since the last suite of GA firmware loads.
Product Advisements Running Auto-VLAN on the IP Phones without the DHCP server offering VLAN information may result in the IP Phone becoming unresponsive. (Applies to IP Phone 2001, 2002, 2004, 2007, 1110, 1120E, 1140E, 1150E) An issue was found with the Auto-VLAN feature in the IP Phones that could result in the IP Phone becoming unresponsive.
1120E and 1140E running firmware previous to 0624C1C and 0625C1C respectively will work when incorrectly connected, but this does introduce the potential for network degradation. These new firmware loads will try and safe guard the network by trying to prevent phones that are mis-cabled to function. This means that the IP Phones that are working on a previous release of firmware may stop working if they are not correctly wired.
2) Stripping of egress Data VLAN tag is configurable – VLAN tag stripping can be enabled or disabled in addition to enabling VLAN support on the phone’s PC port. If VLAN is enabled on the phone’s PC port (ingress direction), the default will be to strip the tag on the egress direction. However, this can be manually overridden to disable stripping even if VLAN tagging (ingress direction) is enabled on the phone’s PC port.
Certain USB Mice do not work with IP Phone 2007 (IP Phone 2007only) It has been discovered that certain USB Mice do not work with the IP Phone 2007. If the mouse does not transit information in the “Production”, “Vendor” and “Manufacturing” fields of the USB communication exchange, the mouse will not be recognized by the IP Phone 2007. Note, that failure to send the above mentioned information is in violation of the USB communication exchange standard.
IP Phone Compatibility These firmware releases are compatible with the following IP Phones: PEC NTDU96AB70 Description IP Phone 2007 (Charcoal with Bezel) – Manufacture Discontinued NTDU96AC70E6 IP Phone 2007 (Charcoal with Bezel) (RoHS) NTYS02AAE6 IP Phone 1110 Graphite with Icon keycaps NTYS02BAE6 IP Phone 1110 Graphite with English keycaps NTYS03AA IP Phone 1120E Graphite with Icon Keycaps – Manufacture Discontinued NTYS03BA IP Phone 1120E Graphite with English keycaps – Manufacture Discontinued NTYS03A
NTYS06AAE6 NTYS06BAE6 IP Phone 1150E Graphite with Icon Keycaps (RoHS) IP Phone 1150E Graphite with English Keycaps (RoHS) 0627C4I.bin 0627C4I.bin . Call Server Compatibility and Requirements These firmware releases are compatible with the below Nortel Call Server. Call Server Notes / Advisements CS 2000 SN10 / CS 2100 SE10 Nortel recommends an upgrade to these firmware releases at the earliest opportunity. - CICM 10.
System Compatibility and Requirements System Notes / Advisements Nortel Application Gateway 1000 6.2 and Nortel Application Gateway 2000 6.2 These firmware releases provide support to interwork with Nortel Application Gateway 1000 (AG1000) release 6.2 and Nortel Application Gateway 2000 (AG2000) release 6.
IP Phone Configuration Menu The text-based configuration was expanded with the 0623C4D firmware release on the IP Phone 1110. The text-based menu structure below presents the complete configuration menu now available: EAP Enable?[0-N,1-Y]:0 if “1” DeviceID[ ] Password:[*******] LLDP Enable? [0-N,1-Y]:1 DHCP? [0-N,1-Y]:1 if “0” SET IP: xxx.xxx.xxx.xxx NETMSK: xxx.xxx.xxx.xxx DEF GW: xxx.xxx.xxx.xxx S1 IP: xxx.xxx.xxx.xxx S1 PORT: S1 ACTION: S1 RETRY COUNT: S1 PK: FFFFFFFFFFFFFFFF S2 IP: xxx.xxx.xxx.
Duplex[0-A,1-F,2-H]:0 Cfg XAS?[0-N, 1-Y]:1 if “1” XAS IP: xxx.xxx.xxx.xxx Voice 802.
Enable 802.1x (EAP): [] DeviceID: Password: Enable 802.1ab (LLDP): [] DHCP: [No, Partial, Full] Set IP: xxx.xxx.xxx.xxx Net Mask: xxx.xxx.xxx.xxx Gateway: xxx.xxx.xxx.xxx S1 IP: xxx.xxx.xxx.xxx Port: S1 Action: Retry: S1 PK: FFFFFFFFFFFFFFFF S2 IP: xxx.xxx.xxx.xxx Port: S2 Action: Retry: S2 PK: FFFFFFFFFFFFFFFF Ntwk Port Speed: [Auto, 10BT, 100BT] Ntwk Port Duplex: [Auto, Force Full, Force Half] Disable Voice 802.
The IP Phone 2007, 1110, 1120E, 1140E and 1150E contain a password protection mechanism to lock out access to the Network Configuration menu. If enabled, access to the Network Configuration menu is password protected and the password is prompted by a pop up window. One must type the password 26567*738 (color*set) from the dial pad and press the center of the navigation cluster (enter key) to enter the Network Configuration menu.