Application Note

FS; Reviewed:

SPOC 09/07/2010

Solution & Interoperability Test Lab Application Notes

12 of 44

11xx12xx-SM

5.7. Define System Features

This section describes the steps for administering system wide call features and options related to

OPS in Communication Manager.

Step Description

Use the change system-parameters features command and navigate to Page 18 to

administer system wide features for the SIP telephones. Those related to features listed in

Table 2 are shown outlined in red. These are all standard Communication Manager

features.

change syste

-parameters features Page 18 of 19

FEATURE-RELATED SYSTEM PARAMETERS

INTERCEPT TREATMENT PARAMETERS

Invalid Number Dialed Intercept Treatment: tone

Invalid Number Dialed Display:

Restricted Number Dialed Intercept Treatment: tone

Restricted Number Dialed Display:

Intercept Treatment On Failed Trunk Transfers? n

WHISPER PAGE

Whisper Page Tone Given To: paged

change system-parameters features Page 19 of 19

FEATURE-RELATED SYSTEM PARAMETERS

IP PARAMETERS

Direct IP-IP Audio Connections? y

IP Audio Hairpinning? y

Synchronization over IP? n

CALL PICKUP

Maximum Number of Digits for Directed Group Call Pickup: 4

Call Pickup on Intercom Calls? y Call Pickup Alerting? n

Temporary Bridged Appearance on Call Pickup? y Directed Call Pickup? y

Extended Group Call Pickup: simple

Enhanced Call Pickup Alerting? N