Application Note

FS; Reviewed:
SPOC 09/07/2010
Solution & Interoperability Test Lab Application Notes
©2010 Avaya Inc. All Rights Reserved.
37 of 44
11xx12xx-SM
each individual phone. For mass deployments, Section 7.4.2 shows how the device
configuration file and a speed dial list file can be used to support automatic configuration. Note
that manually configured buttons will override automatically configured buttons at the same
position. See References [8, 9] for more details.
7.4.1. Manual Configuration
Steps Description
1. Press the More… soft key twice and select Prefs (not shown). Navigate to Feature Options ->
Feature Keys. Then select the desired line appearance key number (e.g., Key 8 as shown
below) and select Edit. The key numbers correspond to button positions on the left and right
sides of the screen as follows (Key 1 is reserved for at least one line appearance).
Left Right
8 4
7 3
6 2
5 1
2. A series of screen prompts will be presented. Respond with the following:
1. Select “1. Speed Dial” from the list button attributes.
2.
Enter text for the button label at the “Enter a label:” prompt and select Next. In this
example, “Fwd Cancel” was entered.
3.
Enter the extension of the desired FNE at the “Enter address and press next” prompt and
select Next. In this example “70007” was entered.
4.
Select Next at the “Enter subject and press next” prompt.
5.
Answer no to “Activate Auto-Retrieve of held call on hang up of speed dial call?”.
6.
Select Back several times to show the main telephone screen. The new speed dial button
should be displayed.