Avaya 1100 Series Expansion Module User Guide Avaya Communication Server 1000 Document Status: Standard Document Version: 03.
© 2010 Avaya Inc. All Rights Reserved. Notices While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes.
Revision history Revision history November 2010 Standard 03.01. This document is up-issued to support rebranding. October 2010 Standard 02.01. This document is up-issued to support Unistim 5.0 and Avaya Communication Server 1000 Release 7.5. May 2009 Standard 01.01. This document is up-issued to support Communication Server 1000 Release 6.0.
Revision history 4
Contents Contents About the Avaya 1100 Series Expansion Module. . . . . . . . . 7 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Adjusting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setup and assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Installing the Expansion Module . . . . . . . . . . . . . . . . .
Contents 6
About the Avaya 1100 Series Expansion Module About the Avaya 1100 Series Expansion Module This document describes the Avaya 1100 Series Expansion Module (Expansion Module) and how to use it with the IP Deskphone.
About the Avaya 1100 Series Expansion Module Figure 1: Avaya 1140E IP Deskphone with Expansion Module Features The Expansion Module has the following features: • 18 keys provide up to 36 additional self-labeled line/feature keys when using the Shift feature. Using the Shift key functionality, an Avaya 1140E IP Deskphone, for example, can have up to 66 additional logical line/feature keys. • Upgradeable firmware using a TFTP or a UFTP Server.
About the Avaya 1100 Series Expansion Module Adjusting the display The Expansion Module is equipped with a graphical, pixel-based, grayscale LCD display area beside the 18 line/feature keys (see Figure 1 on page 8). Each of the 18 physical keys on the Expansion Module has a 10-character display label. This label is set automatically, however, the user can edit the label using the controls on the IP Deskphone.
Setup and assembly Setup and assembly The Expansion Module mounts on the right side of the IP Deskphone. The Expansion Module snaps into the Accessory Expansion Module (AEM) on the back of the IP Deskphone using the desk-mount bracket and structural baseplate supplied with the Expansion Module.
Setup and assembly Installing the Expansion Module Use the following instructions to install the Expansion Module. CAUTION Damage to Equipment To avoid damaging the equipment, remove the power (PoE cable, or local power) from the IP Deskphone before connecting the Expansion Module. 1. Press the tilt lever to adjust the stand angle on the IP Deskphone. You can adjust the stand angle to maximum, instead of removing the stand. See Figure 2. Figure 2: Adjusting the stand angle on the IP Deskphone 2.
Setup and assembly 3. Insert the screws in to the top and bottom holes of the connecting arm of the Expansion Module and tighten until snug. See Figure 3. Figure 3: Connecting the Expansion Module 4. If connecting a second, or a third Expansion Module, repeat steps 2 to 4. Note: The second Expansion Module is attached to the right side of the first Expansion Module. The third Expansion Module is attached to the right side of the second Expansion Module. 5.
Setup and assembly Note: The Expansion Module uses the electrical connection of the IP Deskphone for power. It does not have its own power source. Expansion Module startup initialization Once the Expansion Module has been installed and powered up on the IP Deskphone, the Expansion Module initializes. Table 1 lists the initialization process for the Expansion Module.
Setup and assembly Using the wall-mount option IP Deskphone and Expansion Module combination can be wall-mounted using the wall mount template provided. Adjusting the tilt base The Expansion Module stand provides a continuous tilt adjustment so the tilt angle matches the IP Deskphone stand angle while accommodating variations in the desk surface. A clamp mechanism is used to unlock and lock the foot stand angle. CAUTION Do not over tighten the wheel on the Expansion Module.
Controls and settings Controls and settings When an Expansion Module is installed on an IP Deskphone, the controls and settings of the IP Deskphone control both the IP Deskphone and the Expansion Module. Use the Telephone Options menu on the attached IP Deskphone to set the contrast and feature key labels of the Expansion Module. For more information about controls and settings (including the Telephone Options menu) for your IP Deskphone, see the IP Deskphone user guide.
Controls and settings the mode. Once cleared, the normal display for the current state of the IP Deskphone is displayed.
Controls and settings Table 2 shows the display diagnostic operation on the IP Deskphones and the Expansion Module.
Controls and settings 18
Regulatory and safety information Regulatory and safety information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory and safety information 装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすこと があります。 取扱説明書に従って正しい取り扱いをして下さい。 Table 3 lists EMC compliance for various jurisdictions.
Regulatory and safety information DenAn regulatory notice for Japan 21
Regulatory and safety information 22
Terms you should know Terms you should know Accessory Expansion Module A built-in port on an Avaya IP Deskphone that enables accessory components (such as an Avaya 1100 Series Expansion Module) to connect and communicate with the IP Deskphone. Directory Number (DN) A one- to seven-digit number assigned to a system telephone.
Terms you should know 24
Index Index A Liquid Crystal Display (LCD) 9 Accessory Expansion Module (AEM) 19 R Auto Dial 19 Avaya 1100 Series Expansion Module 7, 19 Avaya 1100 Series Expansion Module controls and settings 15 Regulatory and safety information 21 S Shift key 15 Avaya 1100 Series Expansion Module description 7 Soft keys 19 Avaya 1100 Series Expansion Module display 9 T Avaya 1100 Series Expansion Module features 8 D Tilt base 14 W Wall-mount option 14 Directory Number (DN) 19 Display 9 Display label 9 DN
Index 26