User Guide

While on an active call
213
Using the Park Call feature
You can use the Park Call feature to temporarily park a call to the call
server or to a specific user. You or another user can retrieve the parked
call from another phone. Using Park Call does not tie up a line, since it is
held on the call server.
Note 1: The Park Call feature is not available for all call servers.
Contact your system administrator or service provider to determine if
this feature is available to you.
Note 2: The behavior of the Park Call feature varies depending on
the call server. This can affect the information appearing on the
IP Deskphone.
Note 3: When you park a call to the server, the server returns a
retrieval code. You must enter the code to retrieve the call from park.
Using Park Call
The IP Deskphone prompts you with, Press Park for server or
User to park to a user.
To park a call to the server during a call:
To park a call to a specific user
1. Press the Action context-sensitive soft
and select Park Call from the menu.
2. Press the Park context-sensitive soft key
to park the call to the server.
1. Press the User context-sensitive soft
key to park the call to a User.
Action
Park
User