User Guide

Making an MLPP call from a received Instant Message on page 183
Making an MLPP call by using a programmed speed dial key on page 184
Making an MLPP call by going off-hook
There are three ways to go off-hook in order to make a call.
1. Handsfree key. Press the Handsfree key to go off-hook on the primary line (the
green line button) and produce a dial tone.
2. Line keys. Press any provisioned line key to go off-hook and produce a dial tone.
3. Handset. Pick up the handset to go off-hook on the primary line and produce a dial
tone.
Once off-hook, the display prompts you for the destination address information. The icon on
the display screen indicates the line is off-hook and you can select the precedence of the call
by pressing the Prec soft key.
Note:
You can press the Goodbye key at any time to disconnect from the call.
To make an MLPP call by going off-hook
1. Go off-hook and press the Options soft key.
The Options menu displays:
1. Precedence Level
2.Subject
2. Use the up and down navigation keys to select Precedence Level and then press
the Select soft key.
The Precedence Level screen is displayed. The Precedence choices are:
• Priority
• Immediate
• Flash
3. Use the up and down navigation keys to select the desired precedence level and
then press the Select soft key.
4. Dial the destination of the call and press the Send soft key.
Alternatively, press the Redial soft key to call the last dialed destination.
Note:
The Redial soft key only appears if a number or address was previously entered
Advanced features
182 Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
®
User Guide November 2013
Comments? [e-mail]