User Guide

• Make a call from a received Instant Message.
• Make a call from a programmed key.
The precedence level is not saved in any of the calling methods in the preceding list. For
example, if you make a precedence call by going offhook, and then call the party back using
the Redial key, the precedence is not applied unless you select a precedence from the Redial
menu. If a precedence level is not specified when dialing, the call is a Routine precedence
call.
Precedence ringback tone
When you make a precedence call, you hear a ringback tone, indicating that you have made
a precedence call.
Related topics:
Making an MLPP call by going off-hook on page 283
Making an MLPP call using Inbox/Outbox, Address Book, and Friends List on page 286
Making an MLPP call from a received Instant Message on page 286
Making an MLPP call by using a programmed speed dial key on page 288
Making an MLPP call by going off-hook
There are three ways to go off-hook in order to make a call.
1. Handsfree key. Press the Handsfree key to go off-hook on the primary line (the
green line button) and produce a dial tone.
2. Line keys. Press any provisioned line key to go off-hook and produce a dial tone.
3. Handset. Pick up the handset to go off-hook on the primary line and produce a dial
tone.
Once off-hook, the display prompts you for the destination address information. The icon on
the display screen indicates the line is off-hook and you can select the precedence of the call
by pressing the Prec soft key.
Note:
You can press the Goodbye key at any time to disconnect from the call.
1. Go off-hook and press the Options soft key.
See the following figure.
Making a call with MLPP
Avaya 1120E IP Deskphone with SIP Software User Guide November 2013 283