User guide

Using your IP Phone 1120E

Removing the stand cover

To access the cable routing tracks and attach cables, you must remove

the stand cover. Pull upward on the center catch as indicated in the

following figure, and remove the stand cover. The cable routing tracks are

now accessible.

Figure 8: Remove the stand cover

Connecting the AC power adapter (optional)

Your IP Phone 1120E supports AC power and Power over Ethernet

(PoE). For AC power, use only the Nortel AC Adapter (N0023000). To

use PoE, your connected LAN must support PoE.

Tilt Lever

Button

Handset

cord exit

Center

Catch