User guide

Accessing the IP Phone 1120E
61
• Press the Release/Goodbye key to dismiss the logout prompt and
switch to permanent login.
Attention: If you press the Release/Goodbye key to dismiss the
logout prompt, you also terminate the call.
If you do not respond, the prompt times out in 45 seconds, and the phone
switches to permanent login.
Selecting a location
When you first login to the IP Phone 1120E, the system prompts you for a
location. The location you select is saved in your User Profile.
Depending on your service provider, the Enhanced Emergency Service
uses the location you select or the Directory Number (DN) on the call
server when handling emergency calls. The configuration of the call
server determines how emergency service calls are handled by your IP
Phone.
Attention: During an emergency call, you cannot log out from the
phone or release or disconnect the call. The IP Phone remains
connected to the emergency service until the emergency service
operator disconnects it.
Attention: If the login time expires during an emergency call, a
prompt does not appears and the phone automatically switches to
permanent login.
Attention: When you set your user profile for the first time, you must
confirm that the selected location is correct. You can view your
location by accessing the phone information screen. (See “Viewing
the phone information” on page 204.)