User guide

20 Chapter 4 Telephone setup
NN40050-104NN40050-104
4 Using the dialpad, enter the number of hours between local time and system time.
5 Press OK.
About your programmable buttons
Your System Administrator assigns the four programmable buttons as line, intercom, or memory
buttons. The label for each button appears on the display next to the button. For more information,
see your System Administrator.
Memory buttons
These are buttons that are not assigned as line or intercom buttons. Memory buttons store internal
and external phone numbers or features to give you one-touch dialing or feature activation.
Program memory buttons
You can program a memory button with a new phone number or feature.
External autodial
1 Press Feature *1.
2 Press a memory button.
3 Dial the external phone number.
4 Press OK to store the phone number.
Internal autodial
1 Press Feature *2.
2 Press a memory button.
3 Dial the extension number.
4 Press OK to store the extension number.
Note: Press # to enter half-hour increments.
Note: It may take up to 1 minute for the change to appear on the display.