User guide

1. Disable — to the disable the screensaver.
2. Enable (no password) — to enable the screensaver with password-free mode.
3. Enable (with password) — to enable the screensaver with password mode.
Press Select to select the currently highlighted setting.
Press Back to exit the Screensaver Mode menu.
Note:
Some options may not appear, depending on configuration.
Disable:
Disabling the Screensaver displays a message confirming your selection.
Enable (no password):
Enabling the screensaver in No Password mode displays a message confirming your
selection.
Note:
If the device configuration does not allow the use of a password-free screensaver, this menu
option is not available to you.
Enable (with password):
Enabling the screensaver in password-protected mode prompts you to enter a password
before logging in.
If allowed in the configuration, the user-defined password definition screen is displayed.
The screen displays Enter user password to activate screensaver followed by a
user-input prompt.
To configure a password:
1. Press the Set soft key.
This soft key appears only if the phone configuration allows the setting of user-
defined passwords. Pressing this key invokes a password definition screen that
allows you to configure a password.
If a user-defined password is not allowed, then the Set soft key is not visible, and
you can use only the primary user login password to enable the password–protected
screensaver.
2. Enter a password. Press the abc/123 soft key to toggle input mode between
numeric or alphabet.
3. Press OK. A Screensaver enabled message appears if the password is valid.
An Invalid password message is displayed if the password is invalid.
Press Back to dismiss the Enable (with password) mode menu.
Advanced features
170 Avaya 1140E IP Deskphone with SIP Software on Avaya Aura
®
User Guide November 2013
Comments? [e-mail]