User guide

Configuring the duration of the login on page 43
Logging on multiple user accounts on page 44
Automatic login
Before you first receive your Avaya 1140E IP Deskphone, your system administrator can
configure your IP Deskphone with your user logon and password. If this is the case, after you
plug in the IP Deskphone you can use it without further configuration.
Note:
If the IP Deskphone is configured with automatic logon, you cannot use the log off function,
and you need a password to access some features and functions. Contact your system
administrator or service provider for further information.
Configuring the domain
Before the log on process, if you need to change the domain or confirm that the domain you
log on to is correct, press the Domain context-sensitive soft key from the logon prompt. The
current domain appears on the IP Deskphone display screen. You can edit the domain that is
listed or press the Domain context-sensitive soft key to access a list of available domains to
which you can choose to connect.
Note:
• You must enter the admin password to edit domains.
• Check with your system administrator before editing or changing domains.
To change the domain:
Domain 1. Press the Domain context-sensitive soft key to change
the current domain.
Note:
You must enter an admin password before you can
edit the domain in which the IP Deskphone connects.
2. Press the Up/Down navigation key to highlight the new
domain you want to use.
Select 3. Choose one of the following:
• Press the Select context-sensitive soft key to change
the domain to the highlighted domain from the list. The
Accessing the Avaya 1140E IP Deskphone
40 Avaya 1140E IP Deskphone with SIP Software on Avaya Aura
®
User Guide November 2013
Comments? [e-mail]