User guide

• Confirm that the wireless headset is still in search/pair
mode.
• If the headset timed out and exited search/pairing
mode, put the headset in pairing mode, as discussed in
step 4, and repeat step 15.
• Check that you are using the correct PIN and repeat
step 15.
17. If the name of your headset appears in the Paired box,
proceed to step 18.
If more than one device is paired, and the one you wish
to use is not shown in the Paired box, navigate to the one
you want, as follows:
• Press the Right navigation key one or more times to
highlight the Paired: box. Press the Enter key to start
the edit mode.
• Press the Up/Down navigation key to open the list.
Press the Up/Down navigations key to scroll in the
Paired list and highlight your headset.
• Press the Enter key to select the headset and close the
list. Press the Enter key to exit edit mode.
18. If only one headset is paired, proceed to step 18.
If more than one wireless headset is paired, the first
headset paired is automatically made the active device.
To make a different headset active, do the following:
• Press the Right navigation key one or more times to
highlight the Set button (next to the Set Active Device
item).
• Press the Enter context-sensitive soft key.
The message "Set active: “device name”
appears meaning that the headset named is now the
active headset and is used when you press the headset
key.
19. Press the Exit context-sensitive soft key to exit to the
main display. Changes are saved automatically.
Dual pairing headsets
Take special care when using a dual pairing type of Bluetooth wireless technology headset.
This type of headset can be paired to the base of the headset, as well as to the IP Deskphone.
Configuring a Bluetooth wireless technology headset
Avaya 1140E IP Deskphone with SIP Software on Avaya Aura
®
User Guide November 2013 87