Avaya 1200 Series Expansion Module for SIP Software User Guide Communications Server Document Status: Standard Document Version: 01.
© 2010 Avaya Inc. All Rights Reserved. Notices While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes.
Regulatory and safety information Regulatory and safety information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory and safety information 装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすこと があります。 取扱説明書に従って正しい取り扱いをして下さい。 Table 1 lists EMC compliance for various jurisdictions.
Regulatory and safety information DenAn regulatory notice for Japan 5
Regulatory and safety information 6
Contents Contents Regulatory and safety information . . . . . . . . . . . . . . . . . . . . 3 Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DenAn regulatory notice for Japan . . . . . . . . . . . . . . . . . . . . . . 5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Features . . . . . . . . . . . . . . . . . . . . . .
Contents 8
Introduction Introduction This document describes the Avaya 1200 Series Expansion Module with SIP Software and how to use it with the IP Deskphone. Description The Avaya 1200 Series Expansion Module (SIP Firmware) is supported on the following IP Deskphones: • Avaya 1220 IP Deskphone • Avaya 1230 IP Deskphone The Expansion Module is a hardware accessory that connects to the IP Deskphone and provides additional line appearances and feature keys.
Introduction Figure 1: Avaya 1230 IP Deskphone with the LCD Expansion Module: 12-key Self labeling 10
Introduction Figure 2: Avaya 1230 IP Deskphone with the LED Expansion Module: 18-key paper label 11
Introduction Features The Avaya 1100 Series Expansion Module has the following features: • The Avaya 1220 IP Deskphone and Avaya 1230 IP Deskphone can support up to 7 Expansion Modules . • A desk-mounted bracket and structural baseplate support the connection of an Expansion Moduleto an IP Deskphone or to another Expansion Module. • IP Deskphone and Expansion Module combination can be wallmounted using the wall mount template provided. • Power supplied directly by the IP Deskphone.
Introduction changes to the user package of your IP Deskphone. Contact the system administrator or service provider for further information. Avaya 1100 Series Expansion Module display The Expansion Module is equipped with an LCD display area beside the 12 line/feature keys (see Figure 1 on page 10). Each of the 12 physical keys on the Expansion Module has a 10-character display label. This label is set automatically; however, the user can edit the label using the controls on the IP Deskphone.
Introduction 2. Choose one of the following: Set Back — Press the Set context-sensitive soft key to save the changes and return to the Display menu. — Press the Back context-sensitive soft key to keep existing configurations and return to the Display menu. Backlight The Avaya 1100 Series Expansion Module has a firmware controllable backlight. The Expansion Module draws power from the phone and requires no external power adapter.
Setup and assembly Setup and assembly The Avaya 1100 Series Expansion Module mounts on the right side of the IP Deskphone. The Expansion Module snaps into the Accessory Expansion Module (AEM) on the back of the IP Deskphone using the desk-mount bracket and structural baseplate supplied with the Expansion Module. Installing the Avaya 1100 Series Expansion Module Use the following instructions to install the Avaya 1100 Series Expansion Module.
Setup and assembly 1. Press the tilt lever to adjust the stand angle on the IP Deskphone. You can adjust the stand angle to maximum, instead of removing the stand. See Figure 3. Figure 3: Adjusting the stand angle on the IP Deskphone Accessory Expansion Module (AEM) Port Wheel Tilt Lever Clamp 2. At the back of the IP Deskphone, remove the rubber plug from the AEM port.
Setup and assembly Figure 4: Connecting the Expansion Module 4. If connecting a second, or a third Expansion Module, repeat steps 2 to 4. Note: The second Expansion Module is attached to the right side of the first Expansion Module. The third Expansion Module is attached to the right side of the second Expansion Module. 5. Adjust the height of the IP Deskphone tilt adjustment to a comfortable viewing angle. Then adjust each of the Expansion Module footstands so they are flush to the desk surface.
Setup and assembly Expansion Module startup initialization After the Avaya 1100 Series Expansion Module is installed and powered up on the IP Deskphone, the Expansion Module initializes. Table 2 on page 18 lists the initialization process for the Expansion Module. Table 2: Initializing Expansion Module (Part 1 of 2) Phase Description Expansion Module performs self-test The self-test confirms the operation of the Expansion Module local memory, CPU, and other circuitry.
Setup and assembly Table 2: Initializing Expansion Module (Part 2 of 2) Phase Description Software upgrade The Expansion Module software is distributed together with the IP Deskphone software as a part of the application. When the IP Deskphone detects a new Expansion Module, the software version of the Expansion Module is compared to the version of the Expansion Module software stored on the IP Deskphone.
Setup and assembly Adjusting the tilt base The Avaya 1100 Series Expansion Module stand provides a continuous tilt adjustment so the tilt angle matches the IP Deskphone stand angle while accommodating variations in the desk surface. A clamp mechanism is used to unlock and lock the foot stand angle from wall mount to desktop configuration. CAUTION Do not over tighten the wheel on the Expansion Module.
Avaya 1100 Series Expansion Module programming Avaya 1100 Series Expansion Module programming When an Avaya 1100 Series Expansion Module is installed on an IP Deskphone, the controls and settings of the IP Deskphone control the IP Deskphone and the Expansion Module.
Avaya 1100 Series Expansion Module programming 22
