Application Note

TBH; Reviewed:
SPOC 9/16/2014
Solution & Interoperability Test Lab Application Notes
©2014 Avaya Inc. All Rights Reserved.
5 of 11
JabraMO_L351600
3.1. Answering, Ending, and Placing Calls
To answer, end, or place a call using Jabra Motion Office follow the instructions below.
To Answer a Call
 Press the call control button on the headset to answer an incoming
call. This would automatically activate the headset button on the IP
telephone.
 Alternatively, if the headset button on the IP telephone is pressed
first, then press the call control button on the headset, if it isn’t
already activated, to answer an incoming call. Note that pressing the
headset button on the IP telephone does not automatically activate the
call control button on the headset.
 If auto-answer is enabled and the headset button on the IP telephone
and the call control button on the headset are activated, subsequent
incoming calls will be answered automatically and a two-way audio
path will be established to the headset.
To End a Call
 Press the call control button on the headset to terminate a call. This
automatically deactivates the headset button on the IP telephone.
 Alternatively, if the call is terminated by pressing the headset button
on the IP telephone, the headset remains activated and the control
button on the headset must also be pressed to deactivate the headset.
Note that pressing the headset button on the IP telephone does not
automatically deactivate the headset.
To Place a Call
 The call button on the headset is not used to initiate a call.
Alternatively select the desk phone on the Jabra Motion Office
touchscreen and then press the green handset icon to get dial tone and
dial the number. This would automatically activate the headset button
on the IP telephone.
 Alternatively, if the headset button on the IP telephone is pressed
first, then select the desk phone on the Jabra Motion Office
touchscreen and press the green handset icon to activate the headset.
Pressing the headset button on the IP telephone does not
automatically activate the headset.