Application Note

TBH; Reviewed:
SPOC 9/16/2014
Solution & Interoperability Test Lab Application Notes
©2014 Avaya Inc. All Rights Reserved.
8 of 11
JabraMO_L351600
6. Configure Jabra LINK 35 and Jabra Motion Office
To connect the Jabra Motion Office to the Avaya 1600 Series IP Deskphone, use the supplied
AUX cable to connect the Jabra LINK 35 EHS Adapter to the wireless base of the Jabra Motion
Office via the AUX port on each device. Connect the RJ-9 cable from the LINK 35 EHS adapter
to the headset port of the 1600 Series IP Deskphone. Connect the adhesive end on the ring sensor
cable connected to the LINK 35 EHS adapter to the speakerphone grill of the Avaya 1600 Series
IP Deskphone. See the diagram below. Finally connect the cable that comes with the headset
between the headset base and the LINK 35 EHS adapter via the blue ports marked with a phone
symbol (not shown).