Manualshelf

Application Note

ManualsBrandsAvaya ManualsIP DeskphonesAvaya 1600 Series IP Deskphones
123456789
LYM; Reviewed:
SPOC 11/17/2014
Solution & Interoperability Test Lab Application Notes
©2014 Avaya Inc. All Rights Reserved.
7 of 9
TLKON-16xx-96xx
5.1.2. Configure 96x1 IP Deskphone for incoming call notifications in
headset
Only 96x1 phone support incoming call notification on headset and it requires using 96x1 phone
options to configure. Select Home Options & Settings Call Settings Headset
Signalling Switchhook & Alerting on the phone (not shown). This is supported for 96x1
Series IP Deskphone on both H.323 and SIP protocol. When an incoming call arrives, a short
beep is heard in the headset regardless if the headset button is active or not.
5.1.3. Configure all IP Deskphone for headset as default Audio Path
Select Home Options & Settings Call Settings Audio on the phone (not shown). This
is supported for both 16xx and 96xx Series IP Deskphone. This makes the default audio path as
the headset for any outbound call make or inbound call received via the headset.
5.2. Configure a Station for Avaya 96xx IP Deskphones (SIP)
The configuration for SIP station is performed partially via the System Access Terminal (SAT)
on Communication Manager. The rest of the configurations are performed via the System
Manager. There is an option to generate SIP station without using the SAT when adding a new
SIP user using System Manager. The details will not be covered in this document. Please refer
to the application notes in [3] for complete details. Below shows the SIP Station with Type
9641SIP configured.
display station 10049 Page 1 of 6
STATION
Extension: 10049 Lock Messages? n BCC: 0
Type: 9641SIP Security Code: TN: 1
Port: S00138 Coverage Path 1: COR: 1
Name: AVAYA, SIP3 Coverage Path 2: COS: 1
Hunt-to Station:
STATION OPTIONS
Location: Time of Day Lock Table:
Loss Group: 19
Message Lamp Ext: 10049
Display Language: english Button Modules: 0
Survivable COR: internal
Survivable Trunk Dest? y IP SoftPhone? n
IP Video? n
6. Configure Telekonnectors TLK Konnect and headsets
No configuration is required for the Telekonnectors Konnect. The TLK Konnect provides a
green labelled cable to the headset port on the Avaya phone and another cable (not labelled) to
the headset connector. The USB cable is normally connected to a PC and provides power to the
device. Refer to Figure 1 for details.