User's Manual

Disable/Enable Automatic Gain Control
Issue 6 August 2014 9
8. Press the # button to continue the procedure without changing the displayed status of 802.1Q
The deskphone displays the following text:
where dddd is the current system value of the 802.1 VLAN ID.
9. Enter a valid value between 0 and 4094 for the new value of the 802.1 VLAN ID.
The deskphone displays the following message:
where ddd is the number of seconds to wait for the DHCPOFFER on a non-zero VLAN.
10. Enter a valid value between 0 and 999 for the new value of the DHCPOFFER wait period.
The deskphone displays:
11. Press the # button to save the new values you entered.
The deskphone displays:
Once the new values are stored, the deskphone is reset.
If a new boot program is downloaded from the HTTP server after you enter static addressing
information, you must reenter your static addressing information.
Disable/Enable Automatic Gain Control
Use the following procedure to turn automatic gain control for the handset, headset, and/or the Speaker
on or off.
Note:
Note: The user can potentially override the AGC local procedure settings, as described in the
deskphone user guide. If overridden, the backup file stores the AGC value(s) set by the
user and ignores any setting established using this local procedure.
VLAN ID=dddd
New=_
VLAN test=ddd
New=_
Save new values?
*=no #=yes
New values
being saved