User's Manual

Scenarios for the Restart Process
Issue 6 August 2014 3
Boot File Needs to be Upgraded
The deskphone automatically downloads an upgraded boot file if applicable. In this case, these
messages appear:
The deskphone displays:
While the hardware is being initialized, the deskphone displays:
While either the application file if there is one or the boot code is uncompressed into RAM, the
deskphone displays:
This message counts the seconds as the application file (replboot_v3.app in this example) is being
written into RAM.
When control is passed to the software that was just loaded, the following messages display:
This message continues while the new boot code is being written into RAM.
The deskphone displays the speed of the Ethernet interface in Mbps, that is, 0, 10, or 100. The
message No Ethernet displays until the software determines whether the interface is 10 Mbps or
100 Mbps.
Restarting...
Initializing
Loading: 5 secs
replboot_v3.app 4084KB
Starting...
Updating boot code...
DO NOT UNPLUG THE PHONE!