Release Notes

16
311708-A Rev 00
CR 119591-1: Firewall
On a router configured with one or more firewall interfaces, random tag violations
and bus errors may occur upon bootup.
CR 119595-1: Firewall
On a router configured with one or more firewall interfaces, the firewall may not
function correctly.
CR 119596-1: Firewall
On a router configured with many firewall interfaces, the firewall logs two
messages for each interface upon bootup, slowing the router and filling up the log.
CR 119604-1: Frame relay
After you move a PVC out of the default service record on a router running frame
relay Annex D and add IP/OSPF, the router faults.
CR 119627-1: ATM LANE
The router does not update its LE_ARP cache when receiving topology change
requests, causing connectivity issues until the cache later ages the entry at the set
age-out time.
CR 119628-1: ARN
Both B channel LEDs light when only one B channel is in use on an ARN with a
56/64K DSU in MDA slot 1, an ISDN BRI U interface in MDA slot 2, and a
single-port Ethernet in the main chassis.
CR 119710-1: Firewall
When the firewall on the router fails to open a TCP connection, an incorrect error
message is displayed.
CR 119717-1: Firewall
After a TCP open call fails, the configured router firewall does not recover.
CR 119809: ATM
After you reboot a router configured with 20 or more PVCs, not all PVCs come
up.
CR 119877-1: NTP
NTP does not work in broadcast mode. Some symptoms of this are that NTP
drops random updates and that changing modes dynamically either does not work
or causes a bus error on the router.