Release Notes

24
311708-A Rev 00
CR 90805-1: MPLS
In the MPLS-LDP-Default VCs window, the online Help for the Xmt PCR
parameter and the Xmt SCR parameter needs to be updated to include the value of
0 as an option.
CR 104451-1 ATM
Customer is unable to activate a virtual channel with VCI value of 8193 or greater.
CR 105788-1: Configuration Manager
On a router with a FRE2-060e card installed, when you select Administration >
Kernel Configuration, Site Manager does not show the FRE2-060e slot as an
available slot.
CR 106538-1: TFTP
When you disable TFTP in local mode, the TFTP menu choice accessible from
Protocols > IP is grayed out in Site Manager. This option should still be available
in local mode.
CR 106718-1: BGP
When you attempt to set the parameters BGP Routes and BGP Weights, Site
Manager returns an error.
CR 106858-1: DLSw
With Backup IP Address disabled, Site Manager allows you to configure DLSw
backup peer parameters in the DLSw Peer Configuration window.
CR 107046-1: IP
When changing the Associated Address parameter for an IP unnumbered address,
Site Manager does not save the change.
CR 107172-1: X.25
Deleting a connector on an IPEX service record will not delete the IPEX mapping
entries.
CR 107506-1: Configuration Manager
When you use the Configuration Manager in dynamic mode on HP-UX, and you
try to add a circuit, using the Add Circuit buttons causes a core dump and an error
message occurs.