201-Type Module Recorder Interface User’s Guide 555-250-704 Issue 2 July 2006 © 2006 Avaya Inc.
NOTICE While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no responsibility for any errors. Changes or corrections to the information contained in this document may be incorporated into future issues. YOUR RESPONSIBILITY FOR YOUR SYSTEM’S SECURITY Avaya Inc.
Overview The 201-type Module Recorder Interface is an optional device that, when installed with the Avaya 2420 Digital Telephone, allows you to record telephone conversations. In addition, this module allows you to use the two headset jacks on the 20-type stand rather than a single headset jack directly connected to the 2420 telephone. NOTE: Disconnect the 2420 telephone from the wall jack and remove power before removing and/or installing the 201-type module.
• • • • • • • • Tristar Voice Tube top H81 Tristar Noise Canceling top H81N Duoset (Supra Starter) Voice Tube H141 Headband only Duoset (Supra Starter NC) Noise Canceling top H141N Headband only Duoset (Earset Starter) Voice Tub top H141 Earhooks only Duoset (Earset Starter NC) Noise Canceling top H141N Earhooks only Duoset (Starter Special VT) Voice Tube top H141 Headband & Earhooks Duoset (Starter Special NC) Noise Canceling top H141N Headband & Earhooks Using the 201-Type Module Recorder Interface The
Troubleshooting Visual Power Indicators The 2420 telephone display provides visual indication whether the module has power. To view the power status, select the Options softkey from the 2420 telephone Home screen, and then select the Self Test feature button. “-” indicates that the module is not receiving power or is not operating properly. “1” indicates that a single module is receiving power and is operating properly. “2” indicates that two modules are receiving power and are operating properly.
PROBLEM: THE 2420 TELEPHONE DOES NOT HAVE DIAL TONE 1 Make sure the handset and line cords at your 2420 telephone are securely connected at both ends. 2 If there is still no dial tone, check with your system manager to verify that your telephone is administered correctly. 3 If the telephone is administered correctly but there is still not dial tone, remove power. Remove the module and refer to the 20-Type Stand, 200-Type Module Analog (U.S.
