User's Manual

SZ; Reviewed:
SPOC 8/10/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
21 of 30
ACM-Cisco-CM-GK.doc
4.2.3. Add a New Device Pool
There is a default device pool pre-defined on the Cisco CallManager. In these Application Notes,
the Cisco CallManager will use this default device pool. A new device pool, named avaya, will
be created for Avaya S8300 Server with G350 Media Gateway in Location A. The purpose of
creating a new device pool is to use different regions defined in previous section to select
different codec. The display below shows the device pool configuration utilized for these
Application Notes. Follow the following steps to add a new device pool to the Cisco
CallManager database.
• Click System Æ Device Pool
• Click link Add a New Device Pool