User's Manual

JC; Reviewed:
SPOC 8/6/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
9 of 27
Ubigate-NetScr.doc
Step Description
3. Enter the user name then click Check Names. The user should appear as shown below.
Click OK to save. Then click OK again (not shown) to exit the Group Properties screen.
6. Configure Microsoft Internet Authentication Service
The steps below add the Samsung iBG3026 to the Microsoft IAS as a Remote Authentication
Dial In User Service (RADIUS) client. This enables Microsoft IAS to exchange RADIUS
messages with the Samsung iBG3026. These Application Notes assume the Microsoft IAS is
installed and operational.
6.1. Add RADIUS Client
Step Description
1. Open the Internet Authentication Service application by selecting Start > All
Programs > Administrative Tools > IAS. Right click RADIUS Clients and select New
Radius Client from the pop-up menu as shown below.