User's Manual

AL; Reviewed:
SPOC 8/16/2006
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
6 of 20
J-C-cRTP-PPP.doc
5. Configure the Networks Routers
The following sections describe steps for configuring the Juniper Networks J4300 and Cisco
Systems 1841 routers in the sample configuration.
5.1. Configure the Juniper Networks J4300 router.
This section shows the necessary steps in configuring the Juniper Networks J4300 router as shown in
the sample network. The following steps use the Command Line Interface (CLI) of the J4300 router.
Unless other wise specified, all routers configuration are based on Juniper Networks
recommendation.
Step Description
1.
Connect to the J4300. Log in using the appropriate Login ID and Password.
login:
Password:
The following prompt will appears after successful log in.
interop@J4300>
2.
Enter configuration mode by typing in edit at the prompt.
interop@J4300> edit
interop@J4300#