Operation Manual

Selecting Personalized Options
Issue 3 February 2007 47
Visual Ring (Flash Message Lamp)
The Ring Options option on the Options screen allows you to choose a visual alert for incoming
calls. When you enable the Flash Message Lamp option, the telephone rings and the lamp
above the 2410 display area flashes when an incoming call arrives. By default, the Flash
Message Lamp option is disabled.
Note:
Note: If you disable the Flash Message Lamp option, the Audible Alerting option is
enabled automatically.
To set the Flash Message Lamp option
1. From the Home screen, press the Option softkey.
The Options screen appears.
2. Press the Ring Options feature button.
The Ring Options screen appears.
3. Press the Flash Message Lamp feature button.
The option setting is underlined.
4. Press the Yes/No softkey or feature button 5 to indicate whether you want Flash Message
Lamp enabled.
5. Perform one of the following steps:
● If you want to save the setting you just selected, press the Save softkey. You will hear a
confirmation tone, and you are returned to the Options screen.
● If you want to return to the Options screen without changing the setting, press the
Cancel softkey.
● If you want to return to page 1 of the Home screen without changing the setting, press
.