Release Notes

BCM 3.6 and SRG 1.0 Wireless IP Telephony Patch
Page 7 of 14
GUI 2:
2. Telephony Services
There are two modes in which the i2210/i2211 wireless telephone can operate: DHCP
enabled or Static IP. DHCP will use Dynamic Host Configuration Protocol to assign an
IP address each time the wireless telephone is turned on. If DHCP is enabled, the wireless
telephone also receives all other IP address configurations from the DHCP server.
This feature adds two prompts to input the SVP and TFTP server IP address in Unified
Manager under Services/DHCP/Global options so that this information is passed to the
i2210/i2211 handsets in DHCP offer and ACK messages.
The DHCP server resides in BCM/SRG and is configured to supply the TFTP and SVP
server IP addresses to the i2210/i2211 handsets.