User's Manual

3
Small Stand Wall-Mounting Instructions
Wall Mounting the 4400-SeriesTelephone
Follow these steps to wall mount a small stand to a 4400-Series telephone:
Before you assemble the stand, you must have all handset cords attached and running through their
proper channels. See the instructions packaged with the 4400-Series telephone for jacks and
placement of cords.
1. Remove the handset hook from the handset cradle. Flip the hook 180 degrees and re-insert it so that
the hook edge is facing upward. This keeps the telephone handset in place while it hangs on the wall.
2. Insert the line cord into the line jack on the telephone and route the other end of the cord through the
stand opening.
3. Place the moveable tab on the thicker end of the stand into the slot at the bottom of the back side of
the 4400-Series telephone.
LINE
ADJ