User's Manual

5
Wall-Mounting the 4606 IP Telephone
Follow these steps to attach the small stand to a 4606 IP telephone:
Before you assemble the stand, you must have all handset and optional power supply cords
attached and running through their proper channels. See the instructions packaged with the
4600-Series telephone for jacks and placement of cords.
1. Remove the handset hook from the handset cradle. Flip the hook 180 degrees and re-insert
it so that the hook edge is facing upward. This keeps the telephone handset in place while it
hangs on a wall.
2. Place the moveable tab on the thicker end of the stand into the slot at the bottom of the back
side of the 4606 IP telephone.
3. Push down on the stand toward the top of the telephone, and place the tab on the thinner
end of the stand into the slot at the top of the 4606 IP telephone.
LINE
ADJ
LIN
E
A
D
J