User's Manual

7
Large Stand Wall-Mounting Instructions
Wall Mounting the 4400-SeriesTelephone
Follow these steps to wall mount a large stand to the 4400-Series telephone:
Before you assemble the stand, you must have all handset cords attached and running
through their proper channels. See the instructions packaged with the 4400-Series telephone
for jacks and placement of cords.
1. Remove the handset hook from the handset cradle. Flip the hook 180 degrees and re-insert it
so that hook edge is facing upward. This keeps the telephone handset in place while it hangs
on a wall.
2. Insert the line cord into the line jack on the telephone and route the other end of the cord
through the stand opening.
3. Place the moveable tab on the thicker end of the stand into the slot at the bottom of the back
side of the 4400-Series telephone.
LINE ADJ