User's Manual

9
Wall-Mounting the 4612/4624 IP Telephone with a Large Stand
Follow these steps to attach the large stand to a 4612 or 4624 IP Series telephone:
Before you assemble the stand, you must have all handset and optional power supply cords
attached and running through their proper channels. See the instructions packaged with the
4600-Series telephone for jacks and placement of cords.
1. Remove the handset hook from the handset cradle. Flip the hook 180 degrees and re-insert it
so that hook edge is facing upward. This keeps the telephone handset in place while it hangs
on a wall.
2. Place the moveable tab on the thicker end of the stand into the slot at the bottom of the back
side of the 4612/4624 IP telephone
3. Push down on the stand toward the bottom of the telephone, and place the tab on the thinner
end of the stand into the slot at the top of the 4612/4624 IP telephone.
LINE ADJ
L
IN
E
A
D
J