P580 and P882 User's Guide

Document No. 10-300077, Issue 2 14-9
Configuring RIP Routing
Figure 14-5. Key Chain Web Page
2. Configure the key chain as appropriate. See Table 14-3 for an
explanation of each field.
3. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Table 14-3. Key Chain Parameters
Parameter Defines the...
Key Chain 1-16 character ASCII name of the Key Chain
Key ID Three digit number of the Key. Valid range 1 to 255.
Key Name 16 character alpha-numeric key. This is the actual key
used by MD5 encryption. This setting must be
identical to the Key on other RIP V2 routers on the
same subnet. To be compatible with Cisco devices, do
not use a digit (0 - 9) as the first character.
Key Accept Time:hour The hour(1-23) this key becomes valid
Key Accept
Time:minutes
The minute(0 - 59) this key becomes valid
1 of 2