User's Manual
Table Of Contents
- Configuring IP Utilities
- Contents
- About This Guide
- Technical Support and Online Services
- Chapter 1 Router Upgrade Overview
- Chapter 2 Preparing to Upgrade
- Router Upgrade Prerequisites
- Router Upgrade Hints and Tips
- Initial Upgrade Preparations
- Chapter 3 Starting the Upgrade: Upgrading Site Manager and Router Software
- Chapter 4 Continuing the Upgrade: Transferring Customized Files to the Router
- Chapter 5 Completing the Upgrade: Upgrading PROMs and Con guration Files
- Appendix A Router Integration Examples
- Appendix B Con guration-speci c Issues Affecting Router Upgrades
- Appendix C Upgrading the DCM Software Image in AN and ANH Routers
- Appendix D Upgrading Router Software Using Quick2Con g
- Glossary
- Index
Upgrading Routers from Version 7-10.xx to Version 11.0
C-2 114047 Rev. A
Enter the following command from the Technician Interface to determine the
DCM software image version:
[1:1]$ get wfDCMmw.wfDCMAgentImageVersion.0
The Technician Interface generates a message similar to the following:
wfDCMmw.wfDCMAgentImageVersion.0 = "V1.4.0"
Transferring the DCM Software Image from CD-ROM to your
PC or Workstation
Using UNIX/PC file transfer commands, you can transfer the DCM software
image (in11_140.obj) from CD-ROM to your PC or UNIX workstation. Refer to
Chapter 3 “Loading Router Software onto a PC or UNIX Workstation” for
instructions.
Transferring the DCM Software Image from your PC or
Workstation to a Router
You use Site Manger to transfer the DCM software image from your PC or UNIX
workstation to the router’s Flash memory. Refer to Chapter 4, “Task 2:
Transferring a Customized Image to the Router” for instructions.
Transferring the DCM Image from the Router’s Flash to the
DCM Flash
You can transfer the DCM image from the router’s Flash memory to the Ethernet
DCM’s Flash memory using Site Manager or the Technician Interface.