User's Manual
Table Of Contents
- Configuring IP Utilities
- Contents
- About This Guide
- Technical Support and Online Services
- Chapter 1 Router Upgrade Overview
- Chapter 2 Preparing to Upgrade
- Router Upgrade Prerequisites
- Router Upgrade Hints and Tips
- Initial Upgrade Preparations
- Chapter 3 Starting the Upgrade: Upgrading Site Manager and Router Software
- Chapter 4 Continuing the Upgrade: Transferring Customized Files to the Router
- Chapter 5 Completing the Upgrade: Upgrading PROMs and Con guration Files
- Appendix A Router Integration Examples
- Appendix B Con guration-speci c Issues Affecting Router Upgrades
- Appendix C Upgrading the DCM Software Image in AN and ANH Routers
- Appendix D Upgrading Router Software Using Quick2Con g
- Glossary
- Index
Upgrading Routers from Version 7-10.xx to Version 11.0
3-2 114047 Rev. A
Task 1: Upgrading to Site Manager Version 5.0
This section provides general guidelines for upgrading Site Manager 5.0 software
and Distinct TCP/IP for Microsoft Windows on your PC. It also provides general
guidelines for upgrading Site Manager on your UNIX workstation. Go to the
section you need, as shown in T
able 3-1.
For detailed information about the Distinct product, refer to Distinct TCP/IP for
Microsoft Windows Run Time Installation and Configuration Guide, the Distinct
Corporation documentation supplied with Site Manager. Also, check the Bay
Networks Read Me First documentation for changes to the installation
instructions. For detailed information about installing Site Manager on your PC or
workstation, refer to Quick-Starting Routers and BNX Platforms.
Upgrading the Distinct TCP/IP Stack and Site Manager on a PC
Site Manager on the PC uses a Windows Socket-compatible TCP/IP stack to
communicate across the IP network. Before you can upgrade to Site Manager 5.0
on your PC, you must first upgrade the TCP/IP stack and configure it properly.
Site Manager ships with the Distinct TCP/IP for Microsoft Windows software,
Version 3.31, a Distinct Corporation application. Distinct TCP/IP provides an
interface between Site Manager and the TCP/IP network. Earlier versions of
Distinct TCP/IP will not work with Site Manager 5.0 for the PC.
Note: You can use Quick2Config instead of Site Manager 5.0 to configure AN,
ANH, and ASN routers to support Router Software Version 11.0. For
instructions on how to upgrade an AN, ANH, or ASN to Router Software
Version 11.0 using Quick2Config, see Appendix D.
Table 3-1. Upgrading Site Manager on a PC or UNIX Workstation
If you are Go to section On page
Using a personal computer (PC) Upgrading the Distinct TCP/IP Stack
and Site Manager on a PC
page 3-2
Using a Sun SPARCstation,
IBM RS/6000, or HP 9000
Upgrading Site Manager on a UNIX
Workstation
page 3-6