User's Guide
Table Of Contents
- Table of Contents
- About This Document
- 1. Introduction
- 2. Installation
- 3. Configuration and Operation
- 4. Troubleshooting
- A. AT Command Set
- B. Dial Modifiers
- C. S-Registers
- D. Isolating Problems Using Loopback Data Tests
- E. Quick-Reference Summaries
- Glossary
- Index
8400B Plus Data Module User’s Guide
555-020-709
Issue 2
November 1996
AT Command Set
A-28
Command: &V
Function: View the active configuration and stored profiles.
Type: immediate
Arguments: The &V command does not take an argument.
S-Register: none
Example: AT&V
Comments: The &V command displays all active and stored
configuration data as follows (see sample screen
below):
■ command and S-register settings for the active
configuration
■ command and S-register settings saved in
configuration profiles 0 and 1
■ contents of the four telephone number storage
locations
See Also: "Configuration Parameters" on page 3-7 and Figure C-1
on page C-2.
Table A-1. Accepted AT Command Labels
Label Description
ENTER
020709_2.book Page 28 Friday, April 23, 1999 5:39 AM