User's Guide
Table Of Contents
- Table of Contents
- About This Document
- 1. Introduction
- 2. Installation
- 3. Configuration and Operation
- 4. Troubleshooting
- A. AT Command Set
- B. Dial Modifiers
- C. S-Registers
- D. Isolating Problems Using Loopback Data Tests
- E. Quick-Reference Summaries
- Glossary
- Index
8400B Plus Data Module User’s Guide
555-020-709
Issue 2
November 1996
Dial Modifiers
B-6
Dial Modifier: , (comma)
Function: Used as the pause character for voice calls.
S-Register: S8
Example: ATD P 9,1,8005551212
Comments: The comma causes the 8400B Plus Data Module to
delay dialing. On voice calls, the pause time is stored in
the S-register S8. Dialing is not delayed when the
stored value is zero. On data calls, the comma (,) is
passed to the PBX, which will delay dialing by the
parameter set in administration.
See Also: "Dialing Pause" on page 3-19 and S-register S8 on
page C-15.
Table B-1. Dial Modifiers
Label Description
020709_2.book Page 6 Friday, April 23, 1999 5:39 AM