User's Guide
Table Of Contents
- Table of Contents
- About This Document
- 1. Introduction
- 2. Installation
- 3. Configuration and Operation
- 4. Troubleshooting
- A. AT Command Set
- B. Dial Modifiers
- C. S-Registers
- D. Isolating Problems Using Loopback Data Tests
- E. Quick-Reference Summaries
- Glossary
- Index
8400B Plus Data Module User’s Guide
555-020-709
Issue 2
November 1996
S-Registers
C-7
Register: S0
Description: The value in this S-register represents the ring number
on which an incoming call will be automatically
answered.
Range of Values: The value may be 000 through 255 rings. The
factory-default setting is 000 rings.
Storable: yes
Comments: Setting S-register S0 to any value from 001 through 255
enables automatic answer; a value of 000 disables
automatic answering. The count of incoming rings is
stored in S-register S1.
See Also: "Automatic Answering" on page 3-13 and S-register S1
on page C-8
.
Table C-1. Labels Used in S-Registers
Label Description
020709_2.book Page 7 Friday, April 23, 1999 5:39 AM