User's Guide
Table Of Contents
- Table of Contents
- About This Document
- 1. Introduction
- 2. Installation
- 3. Configuration and Operation
- 4. Troubleshooting
- A. AT Command Set
- B. Dial Modifiers
- C. S-Registers
- D. Isolating Problems Using Loopback Data Tests
- E. Quick-Reference Summaries
- Glossary
- Index
8400B Plus Data Module User’s Guide
555-020-709
Issue 2
November 1996
S-Registers
C-13
Register: S6
Description: This S-register controls the blind dial delay interval for
voice dial calls.
Range of Values: Value may be 000 through 255 seconds; factory-default
is 2 seconds.
Storable: no
Comments: The 8400B Plus Data Module uses the blind dialing
method to originate voice calls since it does not contain
a dial-tone detector. When an off-hook message is sent
to the PBX, the 8400B Plus Data Module pauses for the
specified time before dialing the call.
See Also: "Dialing Delay" on page 3-19.
Table C-1. Labels Used in S-Registers
Label Description
020709_2.book Page 13 Friday, April 23, 1999 5:39 AM