User's Guide

Table Of Contents

8400B Plus Data Module User’s Guide

555-020-709

Issue 2

November 1996

S-Registers

C-17

Description: The value in this S-register determines how long the

8400B Plus Data Module will wait after loss of line

signal is detected before disconnecting.

Range of Values: Value may be 000 through 255 tenths of a second;

factory-default is 14 tenths of a second (1.4 seconds).

Storable: no

Comments: The delay set by this S-register allows the receive line

signal to disappear momentarily without causing a

disconnect (hang up). Setting this S-register to the

maximum value (255) causes the Data Module to

ignore receive line signal status and not disconnect the

data call if line signal is lost.