User's Guide

8400B Plus Data Module User’s Guide 555-020-709
Issue 2
November 1996
Configuration and Operation
3-12
Data Operation
stored so that additional commands can be entered on the same
command line.
Table 3-4. Commands for Using Stored Telephone Numbers
Command Line: Action:
AT&Z
m=nnn...n Store number nnn...n in location m , which is
one of four locations designated by the numbers
0 through 3. For example:
AT&Z2=918006245123
stores the number 918006245123 in number
storage location 2.
AT&Z
m= Delete any number stored in location m , which is
one of four locations designated by the numbers
0 through 3. For example:
AT&Z2=
deletes any number that may have been stored
in number storage location 2.
ATDS=
m Dial the number stored in location m , which is
one of four locations designed by the numbers 0
through 3. For example:
ATDS=2
causes the 8400B Plus Data Module to dial the
number stored in location 2.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
020709_2.book Page 12 Friday, April 23, 1999 5:39 AM