User's Guide
Table Of Contents
- Table of Contents
- About This Document
- 1. Introduction
- 2. Installation
- 3. Configuration and Operation
- 4. Troubleshooting
- A. AT Command Set
- B. Dial Modifiers
- C. S-Registers
- D. Isolating Problems Using Loopback Data Tests
- E. Quick-Reference Summaries
- Glossary
- Index
8400B Plus Data Module User’s Guide
555-020-709
Issue 2
November 1996
AT Command Set
A-5
Command: A/
Function: Re-execute the last valid command line.
Type: immediate
Arguments: none
S-Register: none
Example: A/
Comments: This is one of the two commands that does not require
the AT prefix (+++ is the other one). To repeat the
previously executed command line exactly, type A/
without pressing the Return or Enter key. This
command cannot be combined with any other
command.
See Also: "Repeating a Command" on page 3-5.
Table A-1. Accepted AT Command Labels
Label Description
020709_2.book Page 5 Friday, April 23, 1999 5:39 AM