8400B Plus Data Module Applications Guide 555-020-501 Comcode 107893315 Issue 1 November 1996
555-020-501i1.book : 020-501cr.fm5 Page 2 Thursday, August 20, 1998 10:03 AM Copyright © 1996, Lucent Technologies All Rights Reserved Printed in USA munications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his or her own expense. Notice While reasonable efforts were made to ensure Trademarks DEFINITY is a registered trademark of Lucent Technologies.
555-020-501i1.book : 555-020-501i1.doc Page 4 Thursday, August 20, 1998 10:03 AM 8400B Plus Data Module Applications Guide This document provides a list of application notes that describe how to administer and configure the following data communications software packages for use with the 8400B Plus Data Module.
555-020-501i1.book : 555-020-501i1.doc Page 5 Thursday, August 20, 1998 10:03 AM 8400B Plus Data Module Applications Guide CompuServe CompuServe works with the 8400B Plus Data Module, however it does require a change to the default parameters. NOTE: If you are using the 8400B Plus Data Module with Windows® ’95, you must override the modem type that Windows ’95 selects by default. During the installation process, Windows ’95 performs a modem detection routine and automatically chooses a modem type for you.
55-020-501i1.book : 555-020-501i1.doc Page 6 Thursday, August 20, 1998 10:03 AM Crosstalk 7. Select File, and choose Connect to access the Connection dialog box. 8. Choose Connect to initiate the call. CompuServe makes the connection to the service, connects the call, and the session begins. 9. If a telephone is attached to your 8400B Plus Data Module, you can use it to place a voice call to the voice endpoint while the data call is active.
555-020-501i1.book : 555-020-501i1.doc Page 7 Thursday, August 20, 1998 10:03 AM 8400B Plus Data Module Applications Guide 4. Change the following parameters from their defaults: ■ Connection: select “Local Modem” ■ Settings: — Click on “Dialing” and enter the telephone number to be dialed. — Click on “Modem” and assign the modem type “9600 baud Hayes Compatible” to COM1 (or the appropriate COM port). — Click on “Connection” and under “Port” choose “COM1 9600 baud Hayes Compatible.
555-020-501i1.book : 555-020-501i1.doc Page 8 Thursday, August 20, 1998 10:03 AM Terminal call failures when attempting to access your communications software package. You must manually change the modem type to “Standard” before attempting the following procedure. Procedure 1. Install the Prodigy application on the Windows® platform by running “setup” from the Prodigy installation disk. 2. During setup, Prodigy correctly identifies the 8400B Plus Data Module as “Hayes Compatible.” 3.
555-020-501i1.book : 555-020-501i1.doc Page 9 Thursday, August 20, 1998 10:03 AM 8400B Plus Data Module Applications Guide Procedure 1. Launch the Terminal application. 2. Select Settings from the menu bar, and choose Phone Number. 3. Enter the telephone number to be dialed. 4. Click OK. 5. Select Settings from the menu bar, and choose Communications. 6.
555-020-501i1.book : 555-020-501i1.doc Page 10 Thursday, August 20, 1998 10:03 AM The Microsoft Network The Microsoft Network The Microsoft Network works with the 8400B Plus Data Module, however it does require changes to the default parameters. NOTE: If you are using the 8400B Plus Data Module with Windows ’95, you must override the modem type that Windows ’95 selects by default.
555-020-501i1.book : 555-020-501i1.doc Page 11 Thursday, August 20, 1998 10:03 AM 8400B Plus Data Module Applications Guide 5. Choose the Settings button. ■ The Settings dialog box is displayed. 6. In the “Current Modem” field, select “Standard 9600.” 7. Return to the Calling dialog box and select OK to dial. 8. The Microsoft Network dials the area code and exchange of the user, and the connection is established. 9.