Application Guide

8400B Plus Data Module Applications Guide
9 Issue 1 November 1996
Procedure
1. Launch the Terminal application.
2. Select Settings from the menu bar, and choose Phone Number.
3. Enter the telephone number to be dialed.
4. Click OK.
5. Select Settings from the menu bar, and choose
Communications.
6. Change the following parameters from their defaults:
■ Connector: select the appropriate COM port — usually
COM1
■ Baud Rate: select the appropriate speed
NOTE:
The baud rate is determined by the speed at which
all other connected devices can communicate.
7. Click OK.
8. Select Phone from the menu bar, and choose Dial.
9. Windows Terminal establishes the connection.
10. When prompted to do so, enter your user login and password.
11. If a telephone is attached to your 8400B Plus Data Module, you
can use it to place a voice call to the voice endpoint while the
data call is active.
555-020-501i1.book : 555-020-501i1.doc Page 9 Thursday, August 20, 1998 10:03 AM