User's Manual

Installing a CPU Memory Upgrade in ASN and SN Platforms

1-8 112944-B Rev. A

Figure 1-5. Installing the DRAM SIMM

Removing the Tag SIMM

You need to replace the Tag SIMM (Figure 1-6) if you are upgrading the ASN

DRAM conﬁguration to 32 MB. T

able 1-2, shown earlier, lists the Tag SIMM

requirements for the different DRAM conﬁgurations.

To remove the Tag SIMM:

1. Attach the antistatic wrist strap and remove the component tray, as

described earlier in this chapter.

Note: You do not need to replace the Tag SIMM if you are upgrading the

DRAM conﬁguration to 8 MB or 16 MB.

ASN0035A